Chem 119/124: Green Building Final Project
One of the goals of this course is to get you to think about the environmental
impact of buildings on the earth and explore some of the ways some knowledge
of chemistry can assist one's understanding of the issues that intersect
with the construction or remodeling of a structure. As St. Olaf College
looks to build and renovate components of its facilities over the next few
decades, we can learn about and explore the chemical and environmental impacts
buildings make. Simultaneously we will assist the college
decision-makers so that the various projects become more sustainable and
the campus becomes a "greener" space. In the future, you may be a building
owner or become involved in building/remodeling projects in your community.
Knowledge and insight gained about the nature of chemistry and the impact
of buildings on the earth will assist your own decision-making.
Scope
Use the Environmental Impact Questionnaire (EIQ) provided in the Minnesota
Sustainable Design Guide as an organizational tool in which to investigate
the suitability of materials for the construction and renovation of facilities
on the St. Olaf College campus. Our class projects will emphasize the
interiors of a building, more specifically those items involved in floor
coverings, ceilings, walls, and furnishings. Each project will culminate
in a public oral poster presentation and a written report that will resulting
in a product or material recommendation based on the research conducted.
College decision-makers will be invited to attend the poster presentations
and copies (either paper or electronic) of the written reports will be available
to them upon request. To view completed reports, click here!
Organization
The Group: Three or four students will be assembled to work
together on a project topic. All group members are expected to fully
participate in all facets of the project, from research to writing to presenting.
Group members will have the opportunity to evaluate each other's level of
participation as a component of the project grade.
Project Topics: The group will select a general project topic
from the list below or propose their own topic with prior approval from the
course instructor. The topics listed below are related to the interiors
of buildings and span a rich variety of materials; consequently, it will
be important to narrow the topic.
- Adhesives
- Carpet
- Cement and/or grout
- Doors, office & classroom
- Furniture, office
- Insulating materials (acoustical - wall/ceiling)
- Linoleum
- Metal Finishes (Copper, Zinc, Aluminum, etc.)
- Paint
- Sealer, flooring
- Tile, ceiling
- Tile, floor
- Wood, finishes
- Wood, laminates
- Wood-like products (straw board, recycled fibers, etc.)
Groups will want to discuss their topic choice with the instructor in order
to narrow the focus appropriately. For example, if a group is interested
in ADHESIVES....Just what kind of adhesives are we going to consider?
What will it's purpose be? Let's consider carpet adhesives. Perhaps
there are two kinds of carpet adhesives, ones that are pre-applied to the
backing of the carpet or ones that are first spread on the floor prior to
application of the carpet. In each case, there will be subcategorizes
of the adhesive - an industry standard (most frequently used by those in
the trade), a low VOC type (emits fewer chemicals over time, perhaps made
from renewable resources), and a zero emission adhesive (no chemical emissions
over time, perhaps water-based).
- Adhesives
- Carpet
- Adhesive backed carpet
- Industry standard adhesive
- Low VOC adhesive
- No emission adhesive
- Spreadable adhesive
- Industry standard adhesive
- Low VOC adhesive
- No emission adhesive
One way to sufficiently narrow your investigation might be to contact people
in the trade (on-campus and off-campus) for specific examples of spreadable
carpet adhesives. You then select 3-5 of these adhesives to investigate
farther and build your report.
Environmental Impact Questionnaire (EIQ): The Minnesota Sustainable
Design Guide provides an Environmental Impact Questionnaire for people specifying
the characteristics of products/materials to be used in a building/renovation
project. The EIQ is intended to be a guide for researching environmental
issues relative to building products. Issues are organized under three
primary categories: resource management, toxicity, and performance.
Your group will use this to focus your research efforts on a particular topic.
Some of the information in the EIQ may be very difficult to obtain - don't
fret, persevere to get as much as you can, but don't be afraid to ask for
additional information as well!
Possible Contacts or Resources: The following people or groups
may be able to help you with your project topic.
- Architects
- Building Suppliers (Professional desk at Menards, Home Depot, Lamperts,
etc.)
- Carpenters, Plumbers, Electricians
- City or County Building Inspectors
- Director of Facilities, St. Olaf College
- Engineers - Building
- Green/Sustainable Building Organizations
- Product Manufacturers
- Product Retailers
- Recycling Centers
The Written Report
- Word processed (MS Word or compatible processor)
- 12 point font
- 1 inch page margins
- Line spacing = double
- Digital picture or image of the products or materials being evaluated
- List of resources used recorded in a suitable citation format
- Copies of the EIQs filled out by the group placed in an appendix
- a EIQ word document is available for your use in the course server
folder
- Electronic submission by final exam time on Friday, January 28th
- email as an attachment to: jackson@stolaf.edu
- copy into "Drop Box" folder on Brit L:\Classes\Interim2005\Chem 119
- drop off CD or ZIP disk containing appropriate file(s)
The Oral Poster Presentation
A poster presentation is one of the vehicles scientists use to convey information
to others. The main emphasis of a poster is to convey a story to the
audience and to do so at a level appropriate to the audience. Be careful
to use color wisely and try to keep the wording to a minimum. Unlike
a paper, bulleted lists and sentence fragments are critical components of
a good poster. Take a look at posters scattered throughout the science
center to get ideas about what makes a poster visually appealing.
- 4 foot by 4 foot foam core will be available for you to attach your
posters to the morning of Friday, January 28th.
- Posters can be created in MS Powerpoint and printed on 36 inch wide
paper to a length of 4 feet, if your group plans to do this, posters
should be submitted for printing by 5 pm on Thursday, January 27th.
- Minimum font size = 20 point
- Images or pictures of the products or materials being evaluated
- List of list of resources used recorded in a suitable citation format
Disclaimer